Room Tutorial: Black box + Pico tuner + Rolls amp + VCR/DVD

A picture of a black box console with the following components: projector controls, Rolls sound amplifier, Pico cable TV tuner, VCR/DVD deck, and computer VGA cable hanging on the side.

*Image is a representation of components and appearance. Respective classrooms may have components in different spots.


TURNING ON THE SYSTEM


STEP 1: Turn on the main power-switch.

STEP 2: On the projector control panel, press ON once, and wait 30 seconds.


CONNECTING A LAPTOP: VGA 


STEP 1: On the projector control panel, press COMP (on the projected image, input should indicate COMPUTER or LAPTOP).

STEP 2: Connect VGA (15-pin) cable to laptop (respective laptops may require adapters).
Plug the attached audio-cord into laptop's headphone jack for sound. 

STEP 3: To get audio, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the COMPUTER AUDIO or SOURCE ONE knob.

EXTRA STEP: If no image shows up, press the following keys on the laptop:

Mac: COMMAND ⌘ + F2
Windows: WINDOWS SYMBOL + P, then select DUPLICATE


RECEIVING CABLECAST


STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).

STEP 2: On the video switcher, press in the white square labeled CABLE TV.

STEP 3: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.

STEP 4: Select the desired cable channel on the Pico cable tv tuner.  

STEP 5: Call x15103 to start the cablecast.


USING THE VCR/DVD PLAYER


STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).

STEP 2: On the video switcher, press in the white square labeled VCR/DVD.

STEP 3: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.

STEP 4: Turn on VCR/DVD combo player. Insert media and press play.


USING THE WIRELESS MIC


STEP 1: Open the bottom drawer; the wireless mics will be inside.

STEP 2: Removed a mic from the base. Wait for the LED light on top to flash RED.

STEP 3: Press the lone button on the mic body. The LED light will flash GREEN. The mic is now ON. 

STEP 4: For audio volume, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the WIRELESS MIC knob. 

 

Request Additional Help: 

M-Th 7:45am-10:30pm

F 7:45am-5pm

(415) 338-1494

LIB 85