Room Tutorial: White-box Pixie Pro with HDMI

Photo of a white audio-visual box with a Pixie Pro projector control panel, XLR mic input, sound control panel, and a single HDMI connection.


TURNING ON THE SYSTEM


STEP 1: Press the ON button at the top left corner of the Pixie Pro panel

STEP 2: Panel will light up, and the ceiling projector will turn on. Please give it 30 seconds for the projector to fully warm up.


CONNECTING A LAPTOP: HDMI


STEP 1: At the top-middle of the Pixie Pro panel, press the source button labeled HDMI

STEP 2: Connect the HDMI (small trapezoid) cable to laptop (respective laptops may require adapters).

STEP 3: For audio volume, toggle the knob labeled MAIN on the left sound control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

EXTRA STEP: If no image shows up, press the following keys on the laptop:

Mac: COMMAND ⌘ + F2
Windows: WINDOWS SYMBOL + P, then select DUPLICATE


RECEIVING CABLECAST


STEP 1: At the top-middle of the Pixie Pro panel, press the source button labeled CAMPUS TV or TUNER.

STEP 2: Select the desired cable channel using the channel UP/DOWN buttons on the bottom left of the Pixie panel. 
Verify the channel at the top of the projected image.  

STEP 3: For audio volume, toggle the knob labeled MAIN on the left sound control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

STEP 4: Call x15103 to start the cablecast.

 

Request Additional Help: 

M-Th 7:45am-10:30pm

F 7:45am-5pm

(415) 338-1494

LIB 85