Room Tutorial: Black box + Video switcher + PICO tuner + Rolls amp

*Image is a representation of components and appearance. Respective classrooms may have components in different spots.


TURNING ON THE SYSTEM


STEP 1: Turn on the main power-switch.

STEP 2: On the projector control panel, press ON once, and wait 30 seconds.


CONNECTING A LAPTOP: VGA 


STEP 1: On the projector control panel, press COMP (on the projected image, input should indicate COMPUTER or LAPTOP).

STEP 2: Connect VGA (15-pin) cable to laptop (respective laptops may require adapters).
Plug the attached audio-cord into laptop's headphone jack for sound. 

STEP 3: To get audio, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the COMPUTER AUDIO or SOURCE ONE knob.

EXTRA STEP: If no image shows up, press the following keys on the laptop:

Mac: COMMAND ⌘ + F2
Windows: WINDOWS SYMBOL + P, then select DUPLICATE


RECEIVING CABLECAST


STEP 1: On the projector control panel, press VIDEO. (on the projected image, input should indicate VIDEO).

STEP 2: On the video switcher, press in the white square labeled CABLE TV.

STEP 3: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the MAIN AUDIO knob or SOURCE ONE knob.

STEP 4: Select the desired cable channel on the Pico cable tv tuner.  

STEP 5: Call x15103 to start the cablecast.

 

Request Additional Help: 

M-Th 7:45am-10:30pm

F 7:45am-5pm

(415) 338-1494

LIB 85