Room Tutorial 5H

5H white pull down console overview

CONNECTING A LAPTOP: HDMI OR VGA

console main power switch

STEP 1: Turn on the main power-switch.  

projector power on and off buttons

STEP 2: On the projector control panel, Press ON once, and wait 25-seconds.

Projector source toggle buttons VIDEO and COMP   

STEP 3: On the projector control panel, Press COMP to select either VGA or HDMI, depending on cable used.

HDMI plug head, male.   male VGA connector with mini-stereo audio plug

STEP 4: Connect HDMI (small trapezoid) or VGA (15-pin) cable to laptop; may required adapters. 
(When using VGA, plug the attached audio cord into laptop's headphone jack for sound.)

amplifier left and right output knob     volume adjustment knob

STEP 5: To get audio, turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust volume via the specifically labled knob for whichever cable is used (VGA or HDMI). 

 

EXTRA STEP: If no image shows up, press the following keys on the laptop:

Mac: COMMAND ⌘ + F2
Windows: WINDOWS SYMBOL + P, then select DUPLICATE


RECEIVING CABLECAST

console main power switch

STEP 1: Turn on the main power-switch.   

projector power on and off buttons

STEP 2: On the projector control panel, Press ON once, and wait 25-seconds.

Projector source toggle buttons VIDEO and COMP   

STEP 3: On the projector control panel, Press VIDEO. (on the projected image, input will say VIDEO)

amplifier left and right output knob     amplifier main audio knob

STEP 4: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust cable TV volume via the MAIN AUDIO knob or SOURCE ONE knob.

Image of an VCR/DVD combo player

STEP 5: Turn on VCR/DVD combo player. Use the remote to select the desired channel (as you would your TV at home). 

STEP 6: call x15103 to start the cablecast.
 

USING THE VCR/DVD PLAYER

console main power switch

STEP 1: Turn on the main power-switch.   

projector power on and off buttons

STEP 2: On the projector control panel, Press ON once, and wait 25-seconds.

Projector source toggle buttons VIDEO and COMP   

STEP 3: On the projector control panel, Press VIDEO. (on the projected image, input will say VIDEO)

amplifier left and right output knob     amplifier main audio knob

STEP 4: Turn on the amplifier. Make sure LEFT OUTPUT and RIGHT OUTPUT is at 12'o clock position.
Adjust cable TV volume via the MAIN AUDIO knob or SOURCE ONE knob.

Image of an VCR/DVD combo player

STEP 5: Turn on VCR/DVD combo player. Insert media and press PLAY.  

Request Additional Help: 

M-Th 7:45am-10:30pm

F 7:45am-5pm

(415) 338-1494

LIB 85