Room Tutorial: BH 149

A picture of the audio/visual console in Burk Hall room 149. Components include projector control panel, input selector, and audio controls. Labels indicating document camera and HDMI cable is to the right side.


TURNING ON THE SYSTEM


STEP 1: Press the ON button at the top left corner of the Pixie Pro panel

STEP 2: Panel will light up; the ceiling projector or wall-mounted TV will be on after 30-seconds. Fully wait for projector or TV to warm up before proceeding. 


CONNECTING A LAPTOP: HDMI


STEP 1: At the middle of the Pixie Pro panel, press the source button labled HDMI.

STEP 2: Connect the HDMI cable on the side of the cabinet to the laptop (respective laptops may require adapters).

STEP 3: For audio volume, toggle the knob labeled MAIN on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

EXTRA STEP: If no image shows up, press the following keys on the laptop:

Mac: COMMAND ⌘ + F2
Windows: WINDOWS SYMBOL + P, then select DUPLICATE


RECEIVING CABLECAST


STEP 1: At the middle of the Pixie Pro panel, press the source button labeled CAMPUS TV.

STEP 2: Select the desired cable channel using the channel UP/DOWN buttons on the bottom left of the Pixie Pro panel.
Verify the channel at the top of the projected image.  

STEP 3: For audio volume, toggle the knob labeled MAIN on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

STEP 4: Call x15103 to start the cablecast. 


USING THE DOCUMENT CAMERA


STEP 1: At the middle of the Pixie Pro panel, press the source button labeled DOCUMENT CAMERA.

STEP 2: Document camera is located on a sliding tray on the side of the cabinet.
Slide out the tray, swing open the camera arm, and press the power button. 

STEP 3: Place desired item on the wooden surface to project onto the screen. 


USING THE WIRELESS MIC


STEP 1: Open the bottom drawer; the wireless mics will be inside:

A picture of a REVO wireless mic system that is inside a drawer in Coursesteam enabled classrooms.

STEP 2: Removed a mic from the base. Wait for the LED light on top to flash RED.

STEP 3: Press the lone button on the mic body. The LED light will flash GREEN. The mic is now ON. 

STEP 4: For audio volume, toggle the knob labeled WIRELESS MIC on the left audio control panel.
The light next to the knob must be GREEN. If RED, press the button underneath. 

Request Additional Help: 

M-Th 7:45am-10:30pm

F 7:45am-5pm

(415) 338-1494

LIB 85